HOME  »  MET Media » Blister Packaging »  Viewing lid-placement-blister-sealer     [Image 1 of 7]  :: Jump To  
  You have reached the first slide You have reached the first slide      Show/Hide EXIF Info Index Page Start/Stop the slide show      Next slide Last slide  
Comment: Once the blister trays and product have been placed into the tooling, the lids are fitted between the retractor pins. The Belco Medical Tray Sealer is then ready for sealing.
Click for the original image
 
lid-placement-blister-sealer.jpg - 753 x 500 - (133KB)
Download file (133KB)
medical-blister-seals * Once the blister sealing cycle is complete the drawer is slid out from the machine and the ejection system is used to remove the sealed trays. * 746 x 496 * (115KB)

ready-to-seal * To initiate the lid welding process, the populated tool is pushed into the machine on its drawer. This automatically sets off the sealing cycle according to the pre-set parameters for time, heat and pressure. * 740 x 495 * (122KB)

tray-sealer-ejection * Handy blister tray ejection feature speeds production. * 748 x 489 * (121KB)

tool-placement-tray-sealer * Prior to production the correct tool and settings are selected for the Belco Medical Tray Sealer. Tools can incorporate an RFID tag to ensure correct selection of validated settings. * 743 x 496 * (130KB)

sealed-medical-blisters * The Belco Medical Tray Sealer is suitable for a wide variety of blister and lid materials, including PETG, paper and Tyvek. Settings can be easily validated. * 747 x 490 * (129KB)
Copyright © Medical Engineering Technologies Ltd.