HOME  »  MET Media » Blister Packaging »  Viewing medical-device-blister-dwg     [Image 7 of 7]  :: Jump To  
  First slide Previous slide      Show/Hide EXIF Info Index Page Start/Stop the slide show      You have reached the last slide You have reached the last slide  
Comment: Robust processes for sealing blister trays require good tooling design and construction. This drawing details the required information for tooling manufacture and process development.
medical-blister-seals * Once the blister sealing cycle is complete the drawer is slid out from the machine and the ejection system is used to remove the sealed trays. * 746 x 496 * (115KB)

ready-to-seal * To initiate the lid welding process, the populated tool is pushed into the machine on its drawer. This automatically sets off the sealing cycle according to the pre-set parameters for time, heat and pressure. * 740 x 495 * (122KB)

tray-sealer-ejection * Handy blister tray ejection feature speeds production. * 748 x 489 * (121KB)

tool-placement-tray-sealer * Prior to production the correct tool and settings are selected for the Belco Medical Tray Sealer. Tools can incorporate an RFID tag to ensure correct selection of validated settings. * 743 x 496 * (130KB)

sealed-medical-blisters * The Belco Medical Tray Sealer is suitable for a wide variety of blister and lid materials, including PETG, paper and Tyvek. Settings can be easily validated. * 747 x 490 * (129KB)
Click for the original image
 
medical-device-blister-dwg.jpg - 1024 x 657 - (152KB)
Download file (152KB)
Copyright © Medical Engineering Technologies Ltd.